1. Hot melt machine capacity	10kg
2. Heating power	6KW
3. Air pressure	0.6Mpa
4. Supply voltage	380V/50HZ
5. M/C weight	500kg
6. M/C size	140011001600mm(LWH)

Features:

1. Read and understand all the contents of this manual;

2. Before the machine starts, must make sure that there are no unsafe factors around and install a shield;

3. The total power supply should be cut off whether the machine is maintained or adjusted. Do not adjust the machine in the boot state;

4. Power supply should be turned off when power failure or temporary departure from the machine;

5. When the machine is in the working state, it cannot open the electric box door on the machine; remove the shield to avoid unnecessary danger;

6. Electrical equipment related operations, preferably by electrical technicians. And after power off, wait 15 seconds to repair to prevent residual voltage;

7. Glue injection head must be completely cooled and broken before maintenance; preferably professional maintenance;

8. No smoking in the workplace, no fireworks.

Inquiry Cart 0