
Add to Cart
8-Station Filter Paper Hotmelt Clipping Machine
Technical Parameter
1.Production capacity | 15PCS / min |
2.Filter height | ≦280mm |
3.Hot melt machine capacity | 10kg |
4.Heating power | 6KW |
5.Air pressure | 0.6Mpa |
6.Supply voltage | 380V/50HZ |
7.M/C weight | 500kg |
8.M/C size | 1400*1100*1600mm(L*W*H) |
Features
1.Filter Paper Hotmelt Clipping Machine is used to filter the folded joints at both ends of the adhesive.
2. If the power line is to match the power of the machine, the power supply is 380 V/50Hz. Please check that the power supply configuration is in accordance with the specification.
3. Filter Paper Hotmelt Clipping Machine must be grounded protection; ground wire can be connected to the foot installation bolt.
4.Please check that the cables of each single machine are connected and the emergency buttons are reset before the machine is used.
5. The automatic loading of the production line greatly reduces the labor degree of the operator.
6.then the rubber tube is connected to the dispensing gun on the module, and the dispensing gun is driven by the module to complete the required product processing.